Broken Window Glass

Broken Window Glass

Before you start replacing broken windows, read this carefully and determine whether it is valid for the type of window you'll fix it. To replace a broken window in metal frame you will need a disposable garbage container to put the pieces of glass into one piece cut out of ordinary glass can be purchased at a hardware store or other places where they sell the glass after the was very carefully measured. You need gloves to protect your hands and pliers to safely remove broken glass. A pair of safety goggles, putty knife about one inch or slightly larger, flat-head screwdriver and a small brush.

Use your gloves to replace a broken window and took the Flathead screwdriver or putty knife, I think a better screwdriver and very carefully remove the vinyl spline in the frame window. You will use it again so that should not be damaged. Remove all broken glass with pliers, and brush the area clean and when you measure for replacement glass be sure to have a party doing the cutting is cut 1 / 8 inch smaller than the call for better measurement of length and width.

Clean the garden sitting on vinyl spline, use a brush to clean the glass use bits of glass and paper towels to complete extra cleaning if necessary. Center glass window in a frame. Starting at the corner of the window and use a screwdriver to carefully push back into the frame spline.

Broken Window Glass